Albacore sails from Intensity Sails?

Gene Spillane EGSpillane at Earthlink.net
Thu Jun 4 06:22:06 EDT 2015

We have 2 members in NJ who are interested.  Talk with Barn too.

-----Original Message-----
From: "Michael Heinsdorf" <mheinsdorf at gmail.com>
Sent: ‎6/‎4/‎2015 5:40 AM
To: "Paul Townsend" <townsend at umich.edu>
Cc: "Carey Jones <cwjones321 at att.net>" <cwjones321 at att.net>; "Warner Monteiro" <monteirow at rogers.com>; "Robert Bear" <robertbear99 at hotmail.com>; "Susan and Jim Graham" <sujigraham at gmail.com>; "Diane D. Goebes" <goebes at verizon.net>; "Peter Duncan" <sailfaster at aol.com>; "Dominic Goodwill" <djgoodwill at gmail.com>; "Fernando Leon" <fsleon at gmail.com>; "ts-spruill" <ts-spruill at charter.net>; "Kay Marsh" <kaylmarsh at gmail.com>; "Rolf Zeisler" <rolf.zeisler at verizon.net>; "Henry Pedro" <can7700 at gmail.com>; "Susan Heller-Zeisler" <s_zeisler at verizon.net>; "Gene Spillane" <egspillane at earthlink.net>; "albacore at myfleet.org" <albacore at myfleet.org>; "Barney Harris" <teamspot at hotmail.com>
Subject: Re: Albacore sails from Intensity Sails?

I'm interested. They are out of Bristol, R.I., and I'm up there a couple
times a year. Going to see if I can set up a visit to their operation or
see a suit of sails over the 4th of July weekend.

There were several boxes for VXOne's from Intensity in Sarasota. The boxes
were marked "Made in China", for what its worth.

~Michael
On Jun 2, 2015 12:12 PM, "Paul Townsend" <townsend at umich.edu> wrote:

>
> Fellow Albacore Sailors,
>
> Here at the Michigan Sailing Club we've been researching cost-effective
> replacement sails for our Albacores (the club owns two, and there are two
> privately-owned albs).  We've had good luck with using Intensity for
> replacement Laser sails and I've been in contact with them about Albacore
> sails.
>
> They'd need an order of ten to make it work for them.  Our club is
> probably good for three suits if we can find another seven to go in on the
> fleet purchase.
>
> Anybody else interested?
>
> I don't have too many details at this point about construction, cut (e.g.
> high- or low-aspect jib), etc, but Intensity is thinking about $500/set.
> If there's sufficient interest I can find out more, but I don't want to bug
> them until I know there's enough interest to do an order of ten.
>
> Let me know if you're interested. We're flexible enough to do it this
> season or wait until the off-season.
>
>
> -Paul Townsend
> Albacore 6040
> Commodore, Michigan Sailing Club
>
> albacore6040 at umich.edu
>
>
>
> ---------- Forwarded message ----------
> From: Jim Myers <intensitysails at mac.com>
> Date: Wed, Aug 6, 2014 at 10:12 PM
> Subject: Re: Sails that are "off the menu"
> To: Paul Townsend <townsend at umich.edu>
>
>
> I can only guess at $285 for mains and $185 for jibs or thereabouts.
>
> Jim Myers
> Intensitysails.com
> 200 Bald Hill Rd
> Warwick RI 02886
> Fax 401-738-0883
>
> On Aug 6, 2014, at 10:02 PM, Paul Townsend <townsend at umich.edu> wrote:
>
> Ok, I'll ask around.  Do you have an approximate price point in mind?
>
> -Paul
>
>
> On Wed, Aug 6, 2014 at 4:41 PM, Jim Myers <intensitysails at mac.com> wrote:
>
>> 10 suits would do it.
>>
>>
>>
>> Jim Myers
>> http://www.intensitysails.com
>> 200 Bald Hill Rd
>> Warwick, RI 02886-1182
>> Fax 401-738-0883
>>
>>
>>
>>
>> On Aug 6, 2014, at 4:37 PM, Paul Townsend <townsend at umich.edu> wrote:
>>
>> What would be the minimum number of orders to start making them?
>>
>> -Paul
>>
>>
>> On Fri, Sep 20, 2013 at 11:08 AM, Jim Myers <intensitysails at mac.com>
>> wrote:
>>
>>> I am sorry we do not.  We have considered making Albacore sails but we
>>> would need a fleet order to get going.  Thank you.
>>>
>>>
>>>  Jim Myers
>>> intensitysails.com
>>> 200 Bald Hill Rd
>>> Warwick RI 02886
>>>
>>>
>>>
>>>
>>> On Sep 20, 2013, at 10:40 AM, Paul Townsend <townsend at umich.edu> wrote:
>>>
>>> Hi,
>>>
>>> I'm wondering if you carry/make sails that are not on your website.
>>>
>>> In particular, I have an Albacore and it's time for a new
>>> crusing/everyday jib.
>>>
>>> I'm also thinking about experimenting with "turboing" it by adding an
>>> asymmetrical spinnaker.  The only assy kite I see on your website is the
>>> 400 sq ft Vx, which seems a bit large.  Do you ever sell or make smaller
>>> ones?
>>>
>>> Thanks.
>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://myfleet.org/pipermail/albacore/attachments/20150604/12c1b07f/attachment-0001.html>

myfleet list hosting - Albacore Class Site - More information about the Albacore mailing list